Precision cut.
Hand finished.
One workshop, four disciplines: CNC-machined parts, carbon fiber prepreg layups, small-batch woodcraft and cast resin work — built to a drawing or built from a conversation.
Marine subcontracting
Alongside our own projects, we work as a subcontractor to sailing yacht builders and yards — bringing 25 years in the industry to CNC-machined fittings, carbon fiber layups, interior joinery, upholstered panels and cast resin work built to marine tolerances and finished to survive salt water.
Superyacht headliner panels
Roof panels for a superyacht interior — shaped and upholstered by hand, with every corner and cut-out wrapped and tensioned for a clean, seamless finish.
Dry carbon twill in the mouldCarbon fiber vacuum infusion
A curved carbon fiber part made by vacuum infusion — dry twill fabric laid into the mould, covered with peel ply and flow media, then bagged and infused with resin under vacuum for a light, void-free laminate.
What we make
Every discipline under one roof, each held to the same standard: fit right the first time.
Parts cut to a drawing, not a guess
Aluminum, brass, hardwood and composite sheet, designed and programmed in Fusion 360, then routed and milled on our ATC router — to tolerances tight enough for jigs, fixtures, enclosures and finished hardware.
Light parts that hold their shape
Prepreg layups cured under controlled heat in our curing oven, and vacuum-infused carbon laminates — for brackets, panels and one-off components that need to be stiff and light at the same time.
Small-batch pieces, built the slow way
Boxes, fixtures and furniture pieces joined, hand-sanded and finished with oil or wax rather than pushed through a production line.
Cast surfaces finished glass-clear
River tables, tabletops and inlay work — poured, degassed and levelled, then sanded and polished to a clear, durable surface.
Hot tubs moulded to last
Fiberglass composite hot tubs with a high-gloss gelcoat finish, moulded in one piece for a seamless, easy-to-clean surface that stands up to Nordic winters. Every tub is tailored to the client: freestanding, clad in wood panelling or finished in another material.
The workshop
The two machines that do the heavy lifting.
ATC CNC router
A full-size CNC router with automatic tool change, so complex parts run start to finish without stopping to swap cutters.
Composite curing oven
A temperature-controlled curing oven for prepreg carbon fiber, giving consistent cure cycles and repeatable part quality.
How a job runs
The same four stages whether it's one bracket or a full run.
Consult & design
We talk through the part, the material and what it needs to survive — then sketch or model it.
Program & prepare
CAM toolpaths in Fusion 360, layup schedules or mould prep, depending on which process the part calls for.
Make
Cut, laid up, poured or built by hand on the shop floor, checked against the drawing as we go.
Finish & deliver
Deburred, sanded, oiled or polished as the material calls for, then packed and handed over.
Recent work
Real jobs from the shop, plus renderings of signature pieces.
Shop
Pieces we make to order — request a quote on anything you see, or tell us what you have in mind.
Composite hot tub
Tailored to your needs — freestanding, wood-clad or finished in another material of your choice. Tell us what you have in mind.
"Request a quote" jumps to the contact form and fills in the piece you're asking about.
Get in touch
- Workshop
- Hästbackavägen 126
68700 Terjärv, Finland - Phone
- +358 40 719 1196
- ccs@carpentrycompositesolutions.fi